Filter
Top Products
14
Using a Household Power Source
1. Turn the POWER switch to OFF.
2. Connect the power cord to the
power adapter.
3. Plug the power cord into a power
outlet.
4. Connect the power adapter to the
camcorder’s DC IN terminal.
❍ Turn off the camcorder before connecting or disconnecting the power adapter.
❍ If the adapter is used close to a TV, it may cause picture interference. Move the
adapter away from the TV or the antenna cable.
❍ Do not connect any products that are not expressly recommended to the
camcorder’s DC IN terminal or to the power adapter.
❍ You may hear some noise from the power adapter during use. This is not a
malfunction.
❍ Do not disconnect and reconnect the power cord while charging a battery
pack. The battery pack may not be charged correctly even if the CHARGE
indicator glows steady. The battery pack may also not be charged correctly
when a power outage occurs during charging. Remove the battery pack and
attach it back to the camcorder.
❍ The battery pack may be defective when the CHARGE indicator flashes rapidly.
❍ The CHARGE indicator informs you about the charge status.
0-50%: Flashes once every second
More than 50%: Flashes twice every second
100%: Glows steadily
❍ Charging, Recording and Playback Times
Below times are approximate and vary according to the charging, recording or
playback conditions.
* Approximate times for recording with repeated operations such as start/stop, zooming,
power on/off. Actual time may be shorter.
(VCR)
POWER
CAMERA
PLAYPLAY
OFFOFF
e
q
w
r
BP-508 BP-512/ BP-514 BP-522 BP-535
BP-511
(Supplied) (Optional) (Optional) (Optional) (Optional)
Charging Time 110 min. 120 min. 150 min. 210 min. 310 min.
Max. Recording
Viewfinder
125 min. 225 min. 260 min. 455 min. 730 min.
Time
LCD 85 min. 155 min. 180 min. 320 min. 520 min.
Typical Recording
Viewfinder
65 min. 125 min. 145 min. 255 min. 405 min.
Time*
LCD 45 min. 85 min. 100 min. 175 min. 280 min.
Playback Time 90 min. 170 min. 195 min. 345 min. 550 min.