Canon CP710 Photo Printer User Manual


 
15
If condensation Forms Inside the Devices
z
Stop using the devices immediately.
Continued use may damage the equipment.
Printer: Wait until the water droplets have evaporated completely before resuming use.
Ink cassette, paper cassette, paper: Wipe off the water droplets and allow to return to
room temperature before resuming use.
Printer
z
Please avoid turning the printer’s power on and off needlessly as the printer
initialization consumes ink.
There may not be enough ink left for the allotted sheets in the set.
z
Never use volatile compounds or insecticides on the printer, and do not allow rubber or
vinyl material to remain in prolonged contact with the printer.
These materials may cause deformation of the printer’s casing.
z
If the printer overheats, it will temporarily stop operating. This does not mean that the
printer has malfunctioned.
The printer will resume normal printing as soon as it cools down.
Temporary stoppages are most likely to occur in the following cases:
When printing continuously.
If the room is unusually warm.
If the air vents on the back of the printer are blocked or if ventilation is inadequate.
Ink Cassettes
z
Please use only the ink cassettes specified for use by Canon.
z
Do not open the ink cassette cover while printing is in progress, and do not pull the ink
cassette out.
These actions may damage the printer.
z
Do not touch or pull on the ink sheet.
There may not be enough ink left for the allotted sheets in the set.
z
Do not handle the ink cassettes with wet or sweaty hands.
Paper Cassettes
z
Do not apply excessive force to the paper
cassette
.
Force or impact on the cassette may result in
paper jams or equipment damage.
z
Do not bend or deform the spring located at the
rear of the middle cover of the paper cassette.
z
Do not place any foreign objects in the print
output receptacle (on the top of the paper
cassette).
This area is for paper only.
Spring