Filter
Top Products
21
Save folder: This selects the save folder. Click the button at right end to select the save folder. In the default
setting, a Save folder is created under the Installation folder.
Image quality: This sets the image quality of JPEG files. The default setting is 96. The setting range is 80 to
100. Larger values provide in higher image quality, but also result in larger image sizes.
Image size: This selects the pixel size of JPEG files. The Original setting saves that image at the same size as
the captured image. The 3072, 2160, and 1440 settings indicate the pixel width, and the aspect
ratio of the image is not changed. The default setting is Original.
Date order: This sets the format of the date folder.
Save option: Although the image is saved as a JPEG file under the standard settings, when a checkmark is
inserted in this option, the BMP file and the original file before image adjustment are saved at
the same time. BMP files are saved as BXXXX.bmp, and original files are saved as
RXXXX.crw(jpg). The “XXXX” portion is the same number as the JPEG file.
Limit for displaying message: A warning will be displayed when the storage capacity of the disk where Save
folder is stored becomes lower than the value set here. The default setting is 500(MB).
Item1: This defines the “Note1” label in the Study Information. Up to 12 bytes of alphanumeric characters can
be entered. In some system fonts, the character width is large, or some characters are not displayed.
Therefore, be sure to check the displayed information at the Information screen.
Item2: This defines the “Note2” label in the Study Information.
Item3: This defines the “Note3” label in the Study Information.
Item4: This defines the “Note4” label in the Study Information.