Filter
Top Products
1
1. Introduction
1.1 Overview
This software package is a viewer application specifically for the Canon Non-Mydriatic Retinal Camera CR-DGi
(called “CR-DGi” below). Retinal images captured from the EOS digital camera installed on the CR-DGi are
automatically loaded, and special CR-DGi image processing is performed to display the images. If necessary, the
study information is recorded together with the image and saved to a folder created for each capture date.
Images captured using the CR-DGi are automatically received and displayed.
Exif and RAW images can be captured.
Any size image set by the EOS digital camera can be captured.
Images can be saved in JPEG, BMP, and RAW formats.
Study information is saved inside the JPEG file.
Images can be magnified and reduced in size, and the brightness and contrast can be adjusted.
Images can be printed with the study information.
Images can be managed using dated folders.
Images can be managed by the counter number for each date.
Images can be compared.
1.2 Operating Environment
OS: Windows 2000 Professional or Windows XP Professional
CPU: Pentium III 600 MHz or faster (Pentium 4 1.6 GHz or faster is recommended)
RAM: 256 MB or more (512 MB recommended)
Hard disk: 10 GB or more recommended
Monitor: 1024 x 768 dots or higher resolution, 24bit color or higher
CD-ROM drive Required for installation
Printer Required if using the printing function
Digital camera EOS-D60/10D
Retinal camera CR-DGi