Filter
Top Products
123
Connecting the Camera to a Computer/TV
• A TV set cannot be used in or (stitch assist).
• No image will appear on the LCD monitor when the camera is
connected to a TV.
• If the TV is a stereo model, you can plug the audio plug into either
the left or right Audio In jack. Please refer to the TV’s manual for
details.
The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (p. 140). The default
setting varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan, etc.
- PAL: Europe, Asia (excluding Taiwan), Oceania, etc.
If the video system is set incorrectly, the camera output may not
display properly.
5
Slide the mode switch to
(Shooting), (Movie) or
(Playback).
6
Press the ON/OFF button.
The image will appear on the TV. Shoot or
play back images as usual.