Filter
Top Products
55
Shooting
Reviewing an Image Right after Shooting
Right after a shot is taken, the image appears in the LCD monitor for 2
seconds. In addition, the images will keep on displaying regardless of the
review duration setting if one of the following operations is performed.
• Keeping the shutter button pressed after a shot.
• Pressing the SET button while the image is displayed on the LCD
monitor.
Press the shutter button halfway to stop displaying it so that you can shoot the
next frame.
• You can do the following while the image is displayed.
- Erase the image (p. 102).
- Magnify the image in the display (p. 88).
• Shooting conditions and setting contents can be displayed on
images (p. 39).
Changing the Review Duration
The default review time is 2 seconds. The review function can be set to [Off] or
changed to any time in the range of 2 to 10 seconds in one-second increments.
1
Slide the mode switch to
(Shooting) and select , , ,
, or from the FUNC. menu.
See Selecting a Shooting Mode (p. 53).
2
In the (Rec.) menu, select .
See Selecting Menus and Settings (p. 45).