Filter
Top Products
29
Preparing the Camera
• Please note that the date and time settings may reset to the default
settings if the camera battery has been removed for more than three
weeks. Reset them when this occurs.
• Setting the date and time settings does not cause the date/time
stamp to appear on images. For printing images with the date on
them, refer to the Direct Print User Guide or Software Starter Guide.
Charging the Date/Time Battery
- The camera has a built-in rechargeable lithium battery for saving
settings such as the date and time. This battery is recharged by
the battery pack while it is in the camera. Right after purchasing
the camera, leave a charged battery pack in the camera for about
4 hours to charge the date/time battery. It will charge even when
the camera power is turned off.
- If the Date/Time menu appears when the camera power is turned
on, the date/time battery charge is low. Use the above method to
recharge it.
5
Set the date and time.
• Use the or button to select a field
(year, month, day, hour, minute and date
format).
• Use the or button to change its
value.
6
Press the SET button.
The setting is complete.
7
Press the MENU button.
The display will return to the Shooting or
Playback screen.