Filter
Top Products
14
Quick Start
Quick Start
1
Charge the battery pack (p. 20).
Charge the battery pack using the supplied
battery charger. The charging is complete
when the charge indicator turns from red to
green.
2
Install the battery pack (p. 23).
• Slide the SD card slot/battery cover open
and press the battery lock while you insert
the battery pack.
• Align the arrows on the battery pack and
on the camera to correctly insert the
battery pack.
3
Install the SD card and close the SD
card slot/battery cover (p. 25).
• Insert the SD card as shown on the inside
of the battery cover until you hear it click
into place.
• Do not touch or allow metal objects to
contact the terminals on the back of the
SD card.
4
Slide the mode switch to
(Shooting) (p. 34).
5
Turn on the power (p. 32).
The indicator blinks green, then shuts off.
Charge Indicator
1
2
Battery Lock
Front