130
REFERENCE
Firmware
This is software containing various camera control instructions. The EOS D60 uses the
firmware for image capture and image processing. Although the firmware is preinstalled in the
camera, you can later install the latest version of the firmware when it becomes available on
Canon’s Web site.
Format
Formatting a CF card is the process of preparing the CF card to store image data. Be careful
when formatting a CF card, because the formatting process erases all data stored on the card.
ISO Speed
An index number representing the photosensitivity of silver-halide photo film. This sensitivity
standard is determined by the International Standards Organization (ISO), and is normally
written as “ISO 100”, etc. The higher the ISO speed, the greater the sensitivity to light. Digital
cameras use ISO speeds based on silver-halide photography.
JPEG
Joint Photographic Experts Group is a file format for compressing and storing color images.
The compression ratio can vary, but higher compression results in lower image quality when
the file is expanded (restored).
RAW
This is an image file format that saves the image as is when captured by the camera’s imaging
element. It is intended for image editing with a personal computer.
Image compression, saving, and decompression feature lossless image quality. By using the
bundled software’s image-processing features, you can create the desired image
characteristics.
Red-eye Phenomenon
In a relatively dark room, where subjects’ pupils are dilated, the light from a camera flash
passes through the pupil, is reflected by the retina, and causes the subjects’ pupils to appear
red. Red-eye is particularly prevalent when the flash is close to the optical axis of the lens.
Use the following procedure to minimize red-eye:
1 Shoot with the Red-eye reduction function turned on. (The red-eye reduction lamp lights
before the image is taken, causing the pupils to contract and thus minimizing red-eye.)
2 Shoot with an EX-series Speedlite. (The light reflected from the pupil will not be directed
along the optical axis of the lens, thus minimizing red-eye.)
3 Shoot from as close as possible (same effect as 2).
Shutter Speed
The camera’s shutter opens for a variable length of time to control the amount of light that
reaches the imaging element. This length of time is called the shutter speed.