Filter
Top Products
137
Reference
7
REFERENCE
CF card is not loaded correctly.
➡ Load the CF card correctly. (→28)
CF card is full.
➡ Change to a new CF card, or erase unwanted images. (→28, 43,
104)
The battery pack is out of power.
➡ Charge the battery pack. (→22)
Image out of focus (In-focus light in the viewfinder blinks).
➡ Press the shutter button down halfway to focus again. If this fails,
focus manually. (→29, 59)
Dust or foreign matter on the monitor.
➡ Clean the monitor with a soft eyeglass cloth.
LCD monitor is worn out.
➡ Consult the store where you bought your camera, or a Canon
Service Center. (→10, back cover)
Lens focusing mode switch set to <MF> (or <M>).
➡ Set the focusing mode switch to <AF>. (→27)
Camera shake when the shutter button is pressed.
➡ Press the shutter button carefully so that the camera does not shake.
(→29, 36)
CF card data is corrupted.
➡ Format the CF card. (→105)
➡ Use the specified type of CF card. (→2, 139)
The date/time battery is exhausted.
➡ Replace the battery with a new one. (→113)
Unable to shoot or
record images
LCD monitor
displays and
images are hard to
see
Images are blurred
Unable to use the
CF card
The message
“
” appears on
the LCD panel
Shooting
Images may be protected.
➡ Remove image protection. (→103)
Date/Time setting may be incorrect.
➡ Set date/time correctly. (→34)
Video cable plugs are not inserted fully.
➡ Insert the video cable plugs firmly all the way. (→112)
The correct video format (NTSC or PAL) has not been set.
➡ Set the camera to the correct video format to match the TV set.
(→112)
Cannot erase
images
Incorrect date and
time displayed
No image appears
on the TV screen
Checking and Handling Images