Filter
Top Products
23
If the film is not loaded properly, the <5> icon will blink on the LCD panel and
the shutter will not work. Reload the film properly.
• The shutter curtains have been manufactured with very high precision. Never
touch them with your fingers.When loading film, do not touch or damage the
curtains with your fingers or film.
• In hot and humid environments, do not remove the film packaging until you
are ready to load the film.
• Infrared film cannot be used with this camera.
The camera reads the film cartridge’s DX code and sets the film speed
automatically within ISO 25 - 5000.
• Set the Mode Dial to a Creative Zone mode.
Checking the Film Speed
Move the <7> arrow to the <D>
icon.
•
Look at the LCD panel and press the
<0> button to move the arrow.
(
1
)
s
The current film speed is displayed.
If you want to set a film speed different from the DX-coded film speed or if the
film cartridge is not DX-coded, see “Setting the ISO Film Speed” on page 73.
C.Fn-03-1 can prevent the film speed from being set automatically with the DX
code. (p.85)