Filter
Top Products
67
Exposure Compensation
★
Exposure compensation is used to alter the camera’s standard exposure
setting.You can make the picture look lighter (increased exposure) or
darker (decreased exposure). The exposure compensation amount can
be set up to +/–2 stops in half-stop increments.
1
Turn the Mode Dial to a Creative
Zone mode except <W>.
2
Check the exposure setting.
•
Press the shutter button halfway and
check the display.
3
Set the exposure compensation
amount.
•
Turn the <i> switch to <1> and
turn the <u> dial.
•
To cancel the exposure
compensation, set the exposure
compensation amount to <b>.
• The exposure compensation amount set is retained even after the Mode Dial
is set to <2>.
•
Assuming that a shutter speed of 1/125 sec. and an aperture value of f/8.0 will
give a correct exposure, setting the exposure compensation amount to plus or
minus 1 stop will change the shutter speed or aperture value as follows:
Standard exposure index
Exposure level mark
Increased exposure
Decreased exposure
–1 stop ← 0 → +1 stop
Shutter speed 250 ← 125 → 60
Aperture value 11 ← 8.0 → 5.6
Decreased
exposure
Increased
exposure
4
Take the picture.