Filter
Top Products
59
• If the slowest shutter speed blinks, it indicates
underexposure. In such a case, turn the <l> dial to
set a larger aperture value (smaller f/number) until the
shutter speed display stops blinking.
• If the fastest shutter speed blinks, it indicates
overexposure. In such a case, turn the <l> dial to
set a smaller aperture value (larger f/number) until the
shutter speed display stops blinking.
Aperture Value Display
The larger the f/number, the smaller the diaphragm will be.The aperture value
display will differ depending on the lens.When no lens is attached to the
camera, “Q” will be display for the aperture value.
Depth-of-field Preview
★
Press the depth-of-field preview button
to stop down to the current aperture
setting. The diaphragm in the lens will
be set to the current aperture so you
can check the depth of field (range of
acceptable focus) through the
viewfinder.
• This feature can be used in the Creative Zone.
• While you press the depth-of-field preview button, the exposure will also be
locked (AE lock).