Canon ELPH130RED Digital Camera User Manual


 
61
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Cover
AdvancedGuide
4
PMode
•The shutter speed may be equivalent when you move the zoom lever all the
way toward <i> for maximum telephoto, and when you zoom in to enlarge
the subject to the same size following step 2 in “Zooming In Closer on Subjects
(Digital Zoom)” (=
35).
Still Images Movies
Changing the AF Frame Mode
Change the AF (auto focus) frame mode to suit the shooting conditions as
follows.
Press the <n> button, choose [AF
Frame] on the [4] tab, and then choose
the desired option (=
28).
Still Images Movies
FaceAiAF
• Detects people’s faces, and then sets the focus, exposure (evaluative
metering only), and white balance ([ ] only).
• After you aim the camera at the subject, a white frame is displayed
around the person’s face determined by the camera to be the main
subject, and up to two gray frames are displayed around other detected
faces.
• When the camera detects movement, frames will follow moving subjects,
within a certain range.
• After you press the shutter button halfway, up to nine green frames are
displayed around faces in focus.
•If faces are not detected, or when only gray frames are displayed
(without a white frame), up to nine green frames are displayed in the
areas in focus when you press the shutter button halfway.
•If faces are not detected when Servo AF (=
62) is set to [On], the
AF frame is displayed in the center of the screen when you press
the shutter button halfway.
•Examples of faces that cannot be detected:
- Subjects that are distant or extremely close
- Subjects that are dark or light
- Faces in prole, at an angle, or partly hidden
•The camera may misinterpret non-human subjects as faces.
•No AF frames are displayed if the camera cannot focus when you
press the shutter button halfway.
Still Images
ChoosingSubjectstoFocusOn(TrackingAF)
Shoot after choosing a subject to focus on as follows.
1 Choose[TrackingAF].
Follow the steps in “Changing the AF
Frame Mode” (=
61) to choose
[Tracking AF].
[ ] is displayed in the center of the
screen.
2 Chooseasubjecttofocuson.
Aim the camera so that [ ] is on the
desired subject, and then press the <q>
button.
C OPY