Canon ELPH130RED Digital Camera User Manual


  Open as PDF
of 147
 
95
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Cover
AdvancedGuide
6
Wi-FiFunctions
CheckingYourWi-FiEnvironment
To use Wi-Fi, a Wi-Fi base unit (Wi-Fi router, etc.) that acts as your access
point must be connected to a computer. Be sure to use a Wi-Fi base unit
that conforms to the Wi-Fi standard listed in Specications (=
140).
If you are already using Wi-Fi, conrm the following items and mark each
one on the Check sheet. For instructions on checking network settings,
refer to the access point user guide.
•If system administrator status is needed to adjust network settings,
contact the system administrator for details.
•These settings are very important for network security. Exercise
adequate caution when changing these settings.
Check sheet
Networkname(SSID/ESSID)
The SSID or ESSID for the access point you use.
Networkcerticate/dataencryption(encryptionmethod/
encryptionmode)
The method for encrypting data during transmission via
Wi-Fi.
○
None
○
WEP (open system
authentication)
○
WPA-PSK (TKIP)
○
WPA-PSK (AES)
○
WPA2-PSK (TKIP)
○
WPA2-PSK (AES)
Encryptionkey(networkkey)
The data encryption key used for transmission via Wi-Fi.
Keyindex(sentkey)
The key specied when using WEP for Network certicate/
data encryption.
○
1
•A router is a device that creates a network (LAN) structure for connecting
multiple computers. A router that contains an internal Wi-Fi function is called a
“Wi-Fi router”.
•This guide refers to all Wi-Fi routers and base stations as “access points”.
•If you use MAC address ltering on your Wi-Fi network, be sure to add the
camera’s MAC address to your access point. You can check your camera’s
MAC address by choosing the [3] tab, [Wi-Fi Settings], and then [Check MAC
Address].
ComputerSettingsforConnectingviaWi-Fi
(Windowsonly)
On a computer running Windows, you must congure the following settings
before you can connect the camera to the computer wirelessly.
1 Conrmthecomputeris
connectedtoWi-Fi.
For instructions on checking your network
connection, refer to the computer user
manual.
2 Congurethesetting.
Click in the following order: [Start] menu
►
[All Programs]
►
[Canon Utilities]
►
[CameraWindow]
►
[Wi-Fi connection
setup].
In the application that opens, follow the
on-screen instructions and congure the
setting.
C OPY
 previous next