Filter
Top Products
93
Playback/Editing
Pressing will not start
recording.
Set the camcorder to mode. 32
While a scene is being recorded on the hard disk, additional recording is
not possible.
–
The hard disk is full. Delete some recordings or initialize the hard disk to
free some space.
41
64
The hard disk contains the maximum number of scenes. Delete some
recordings.
41
Recording may not be possible while the drop protection mechanism is
active ( appears).
47
The camcorder has exceeded its operational temperature ( appears).
Turn off the camcorder and let it cool down before resuming use.
–
The camcorder has fallen below its operational temperature
( appears). Turn it off and use it in a warmer location. Make sure to
avoid a rapid temperature change.
–
Even after stopping recording, the
HDD access indicator does not go off.
The scene is being recorded on the hard disk. This is not a malfunction. 32
The point where was
pressed does not match the
beginning/end of the recording.
There is a slight interval between pressing and the actual start
of recording on the hard disk. This is not a malfunction.
–
The recording suddenly stops shortly
after starting recording.
If recording near loud sounds or strong vibrations, move to another
location.
–
The camcorder has exceeded its operational temperature ( appears).
Turn off the camcorder and let it cool down before resuming use.
–
Camcorder will not focus. Autofocus does not work on the subject. Focus manually. 56
Adjust the viewfinder with the dioptric adjustment lever. 33
Lens or Instant AF sensor is dirty. Clean the lens or sensor with a soft lens-
cleaning cloth. Never use tissue paper to clean the lens.
102
Sound is distorted. When recording near loud sounds (such as fireworks or concerts), sound
may become distorted. This is not a malfunction.
–
Viewfinder picture is blurred. Adjust the viewfinder with the dioptric adjustment lever. 33
Problem Solution
Pressing the playback button does
not start playback.
Set the camcorder to mode. 37
The camcorder has exceeded its operational temperature ( appears).
Turn off the camcorder and let it cool down before resuming use.
–
The camcorder has fallen below its operational temperature
( appears). Turn it off and use it in a warmer location. Make sure to
avoid a rapid temperature change.
–
Occasionally the operation sound can
be heard.
If the camcorder is moved suddenly while recording, sound from the hard
disk may be recorded.
–
Problem Solution
START/STOP
START/STOP START/STOP
D122_NTSC_E.book Page 93 Thursday, July 19, 2007 6:43 PM