Filter
Top Products
Message Explanation
COULD NOT PRINT X You attempted to use the print order settings to print X images that were
IMAGES recorded with another camcorder, with a different compression or were
edited on a computer.
SET _] PRINT ORDER You attempted to print an image from the CARD PLAY menu
[_ _ PRINT] without having set the print order.
PRINT ORDER You attempted to set more than 200 still images in the print order.
ERROR
CANNOT TRIM You attempted to trim an image that was recorded with another
camcorder.
READJUST TRIMMING You changed the print style after you set the trimming settings.
PRINTER ERROR Cancel printing. Turn off the printer and turn it back on. Check the printer
status. If the error persists, consult your dealer or a Canon Service
Center listed in the Contact List provided with the printer or the printer
manual.
PRINT ERROR Cancel printing, disconnect the USB cable and turn offthe printer. After a
while, turn the printer back on and reconnect the USB cable. Check the
printer status. If the error persists, consult your dealer or a Canon
Service Center listed in the Contact List provided with the printer or the
printer manual.
When you are printing using the _ _ button, check the print settings.
HARDWARE ERROR Cancel printing. Turn offthe printer and turn it back on. Check the printer
i status. If the printer is equipped with a battery, it might be exhausted. In
such case, turn off the printer, replace the battery and turn it back on. If
the error persists, consult your dealer or a Canon Service Center listed in
the Contact List provided with the printer or the printer manual.
RECHARGE THE The printer battery is depleted.
PRINTER BATTERY
COMMUNICATION The printer is experiencing a data transmission erro_: Cancel printing,
ERROR disconnect the USB cable and turn off the printer. After a while, turn the
printer back on and reconnect the USB cable. When you are printing
using the _ _ button, check the print settings.
Or, you attempted to print from a memory card that contains a large
number of images. Reduce the number of images.
CHECK PRINT The print setting cannot be used for printing with the _ _ button.
SETTINGS
PRINTER IN USE
PRINTER WARMING UP
PAPER LEVER ERROR
PRINTER COVER OPEN
NO PRINTHEAD
The printer is in use. Check the printer status.
Printer is warming up. If the message does not disappear after a few
seconds, check the printer status.
Paper lever error occurred. Adjust the paper selection lever to the proper
position.
Close the printer cover securely.
No print head is installed in the printer or print head is defect. Refer to the
instruction manual of your printe_:
140