Filter
Top Products
Using the Wireless Controller
Point it at the camcorder's remote
sensor when you press the buttons.
inserting the Batt_ ............. ......
The wireless controller operates with a lithium button battery CR2025.
1. Press the tab in the direction of
the arrow and pull out the battery
holder.
2. Place the lithium button battery
with the + side facing up.
3. Insert the battery holder.
_Tab
O The wireless controller may not work properly when the remote sensor is
subjected to strong light sources or direct sunlight.
O If the wireless controller does not work, check if the remote sensor is set to
[OFF ((_ ](CJ3 77).
O When the camcorder cannot be operated with the wireless controller, or when it
can only be operated in very close range, replace the battery.
2O