Filter
Top Products
Playing Back on a TV Screen
The AV terminal also serves as headphones terminal. When "_" is displayed on the
screen, change the setting following the procedure below.
I
1
MENU VCR SETUP I_ AV/PHONES _ ..AV
([_ 38)
J
Open the menu and select [VCR SETUP]. Select [AV/PHONES Q], set it to
[AV] and close the menu.
TVs with AudiQLVideo Te_mina!s ....................................................................................................................................................................
Refer also to the TV or VCR instruction manual.
1. Turn off all devices before starting the connections.
2. Connect the STV=250N Stereo Video Cable to the camcorder's AV
terminal and the audio/video terminals on the TV/VCR.
Connect the white plug to the white audio terminal L (left), the red plug to the red audio
terminal R (right) and the yellow plug to the yellow video terminal VIDEO.
3. If connecting to a "IV, set the input selector to VIDEO. If connecting to
a VCR, set the input selector to LINE.
C) We recommend powering the camcorder from a household power source.
O TVs with Video IDol system: Recordings made in the widescreen mode will be
automatically played back in widescreen mode.
36