Filter
Top Products
Playback
Problem
Pressing the playback button
does not start playback.
Image will not appear on the
TV screen.
Tape is running, but image will
not appear on the TV screen.
No sound from the built-in
speakeE
Noise comes outofthe
headphones.
Cause
Camcorder is turned off, or is
not set to PLAY (VCR) mode.
The TAPE/CARD switch is set
to CARD.
Cassette is not loaded.
Tape reached the end
(" _] END" flashes on the
screen).
lAY/PHONES _"_] is set to
[PHONES _] in the menu.
[AV_ DV] is set to [ON] in
the menu.
TV/VIDEO selector on the TV
is not set to VIDEO.
Video heads are dirty.
You attempted to play back or
dub copyright protected tape.
Speaker volume is turned off.
[AV/PHONES _-} ] is set to
[AV] in the menu.
Solution
Set the camcorder to PLAY
(VCR) mode.
Set the TAPE/CARD switch to
TAPE.
Load a cassette.
Rewind the tape.
Set [AV/PHONES _'_ ] to [AV]
in the menu.
Set lAY _ DV] to [OFF] in the
menu.
Set the selector to VIDEO.
Clean the video heads.
Stop playback/d ubbing.
Adjust the volume with the
SET dial.
Set [AV/PHON ES _}] to
[PHONES _C)] in the menu.
Editing
Problem
Dubbing via the camcorder's
DV terminal does not work.
Cause
[AV_ DV] is setto [ON] in
the menu.
Wrong signalformat.
Solution
Set [AV _ DV] to [OFF] in the
menu.
Dubbing may work via the AV
terminal.
Refer also to the instruction
manual of the connected
device.
33
33
16
33
36
84
36
I42
35
35
CZ3
84
148