Filter
Top Products
Loading/Unloading a Cassette
Use only videocassettes marked with the _°_D logo.
1. Slide the OPEN/EJECT switch and Tape protection tab
open the cassette compartment _-_
cover.
The cassette compartment opens
automatically.
2. Load/unload the cassette.
• Load the cassette with the window
facing the grip belt.
• Unload the cassette by pulling it straight
out.
3. Press the _ mark on the
cassette compartment until it
clicks.
4.
Wait for the cassette compartment
to retract automatically and close
the cassette compartment cover.
O Do not interfere with the cassette compartment while it is opening or closing
automatically, or attempt to close the cover before the cassette compartment
has fully retracted.
O Be careful not to get your fingers caught in the cassette compartment cover.
If the camcorder is connected to a power source, cassettes can be loaded/
unloaded even if the POWER switch is set to OFR
16