Canon SX50 HS Digital Camera User Manual


  Open as PDF
of 286
 
246
UsinganEye-FiCard
• Choosing[ ]modewillinterrupttheEye-Ficonnection.AlthoughtheEye-Fi
connectionwillberestoredafteryouchooseanothershootingmodeorenter
Playbackmode,thecameramaytransferanymoviesmadein[
]mode
again.
Checking Connection Information
ChecktheaccesspointSSIDusedbytheEye-Ficardortheconnection
status,asneeded.
Pressthe<n>button,choose
[Eye-FiSettings]onthe[3]tab,andthen
pressthe<m>button.
Choose[Connectioninfo],andthenpress
the<m>button.
Theconnectioninformationscreenis
displayed.
Disabling Eye-Fi Transfer
CongurethesettingasfollowstodisableEye-Fitransferbythecard,if
necessary.
Choose[Disable]in[Eye-Fitrans.].
Pressthe<n>button,choose
[Eye-FiSettings]onthe[3]tab,andthen
pressthe<m>button.
Choose[Eye-Fitrans.],andthenchoose
[Disable].
•[Eye-FiSettings]isnotshownunlessanEye-Ficardisinthe
camerawithitswrite-protecttabintheunlockedposition.Forthis
reason,youcannotchangesettingsforaninsertedEye-Ficardif
thewrite-protecttabisinthelockedposition.
COPY
 previous next