Canon VB-H610D Security Camera User Manual


 
Performing Operations and Settings in the Admin Viewer
139
Admin Viewer/VB Viewer
7
Setting White Balance
(1) [Auto]
The white balance is adjusted automatically.
(2) [Light Source]
Select the light source from the pull-down menu below
according to the condition in which the camera is
used.
[Daylight Fluorescent] : Select this option to capture
video under daylight
fluorescent lighting.
[White Fluorescent] : Select this option to capture
video under daylight
fluorescent lighting or white
fluorescent lighting.
[Warm Fluorescent] : Select this option to capture
video under warm fluorescent
lighting.
[Mercury Lamp] : Select this option to capture
video under mercury lamps.
[Sodium Lamp] : Select this option to capture
video under orange sodium
lamps.
[Halogen Lamp] : Select this option to capture
video under halogen lamps or
incandescent bulbs.
(3) [Lock]
The white balance is fixed to that of the video currently
received.
To forcibly fix the white balance according to the light
source, use [One-shot WB].
Example of Setting Method:
Irradiate a white subject (white paper, etc.) using the
light source and capture the subject over the entire
screen. In this condition, select [One-shot WB].
Setting the Day/Night Mode
(1) [Auto]
The camera automatically switches to day mode or
night mode depending on ambient brightness.
(2) [Day Mode]
Color image can be viewed in the normal mode.
(3) [Night Mode]
Images are shown in black and white, due to the
disabling of the infrared cut filter.
(4) [Day/Night Mode Focus Settings]
Click to display the [Day/Night Mode Focus Settings]
panel for making focus settings when switching Day/
Important
If the subject is a traffic signal or electronic scoreboard, etc.,
the captured image may flicker.
In this case, try changing the exposure mode to [Auto (Shutter-
priority AE)] and then select a shutter speed lower than 1/100,
to see if the situation improves.
(1)
(2)
(3)
(3)
Important
Since the light source selection options are based on
representative characteristics, proper colors may not be
achieved depending on the applicable light source. In this
case, use the [One-shot WB] function.
If the subject looks greenish under mercury lamps in the
[Auto] mode, select the [Mercury Lamp] mode under light
source. If the image is still not shown in appropriate colors
under mercury lamps when the [Mercury Lamp] mode is
selected under light source, use the [Auto] mode.
When the subject has only one color or when sodium lamps,
mercury lamps and certain other fluorescent lightings are
used, camera colors may not be adjusted automatically.
When [Day/Night] is set to [Night Mode] (including when it is
set to [Auto] and night mode is judged to be applicable), the
white balance function cannot be used.
Notes on capturing video continuously day and night
If a subject that seldom changes is captured in a location
where the light source changes gradually, such as when
capturing a subject continuously day and night, the image
may not be shown in appropriate colors.
In the above case, applying changes to the image to capture
will achieve the appropriate colors.
(2)
(3)
(4)
(1)