Filter
Top Products
142
You can set the camera so that the following data is saved automatically to the camera’s memory card. (“Chapter 4 Setting
Page”, “[Memory Card] Memory Card Operations and Settings” (p. 69)).
When either the storage capacity of the memory card or the number of files that can be saved is reached, you cannot save
further video to the memory card. If this happens, delete any unneeded video files with the Recorded Video Utility.
• Video files when recording-mode stream transmission failed to be sent due to network errors (JPEG only)
• Video files when HTTP or FTP upload failed (JPEG/H.264(1))
• Video files manually recorded by the user from the Admin Viewer (JPEG/H.264)
• Video files recorded by [External Device Input], [Volume Detection], and the intelligent functions when an event occurs
(JPEG/H.264(1))
• Video files recorded using a timer (JPEG/H.264(1))
•Log
Access to the Memory Card
Use the Recorded Video Utility (p. 112) of the Admin Tools or FTP software (not included) to access the camera using the
camera’s IP address.
FTP Software Settings
Address: Camera IP address (factory default setting: 192.168.100.1)
User ID: Administrator user ID (factory default setting: root)
Password: Administrator password (factory default setting: camera)
Directory Structure for Data Downloaded with Recorded Video Utility
When video on a memory card is downloaded to a computer with the Recorded Video Utility, folders are created
automatically in accordance with conditions such as the camera and the date and time.
The following shows the folder structure.
Example: H.264 video, manually recorded using a camera with an IP address of 192.168.100.1, on Sept. 10, 2013, from
16:00:00 to 16:59:59 (Camera Time Zone: GMT+09:00).
(1) Folder specified with [Download to]
(2) IP address of the camera
(3) Video recording date
(4) Recording start and end times (UTC)
(5) Time difference from UTC
(6) Recording type
E: Event
M: Manual recording
R: Recording-mode stream
T: Timer
U: Upload
(7) Video format (JPEG or H.264)
Note
• A folder is created once per hour.
• If the time difference is added to the starting and ending times, it will equal the local time.
Memory Card Access
Important
• When deleting a video using a method other than the Recorded Video Utility, you must perform [Recreate Video Management
Information] under [Memory Card] in the setting page (p. 70).
• Canon will assume no liability for any accident or damage resulting from use of FTP software.
D:\work \192.168.100.1\ 20130910 \070000_075959 _+9 _ M _ H264
(1) (2) (3) (4) (5) (6) (7)