Canon vb-s31D Security Camera User Manual


 
50
Note
RTP stream URL
rtsp://IP_address:port_number/rtpstream/config1(~5)=r|u|m
[=r|u|m] is optional and can be omitted. If specified, specify
only one option.
r: Requests RTP over TCP
u: Requests RTP over UDP
m: Requests multicast
Example: RTP streaming 1 request using RTP over TCP
rtsp://192.168.100.1:554/rtpstream/config1=r
Note that the actual operation is dependent on the RTP client
application, so the URL does not necessarily specify the
method used for transmission.
The video quality and, when H.264 is selected, bit rate control,
video size, and frame rate, are determined by the [Video]
settings.
Regardless of the [Server] > [Audio Server] > [Audio
Transmission from the Camera] setting, RTP streaming audio
will be used.
However, to use audio settings, select [Enable] for [Audio
Transmission from the Camera] and make the settings.
The [Access Control] > [User Authority] > [Video Distribution]
and [Audio Distribution] settings are not used for RTP.
RTP streaming video may not be viewable on systems using a
proxy server or firewall. If the video cannot be viewed, contact
the system administrator.
If host access restrictions are applied to a client while it is
streaming using RTP over UDP, it may take from a few to
several seconds until streaming ceases.