Canon vb-s31D Security Camera User Manual


 
[Event] Setting Video Record, Volume Detection, External Device Output/Input and Timer
59
4
Setting Page
Select [Disable] to disable Day/Night Mode switching.
Note
When using timers that run continuously for 24 hours with a
[Repeat Interval] of 30 seconds or less, set the timer start and
end times so the timers can run continuously.
Example:
Important
[Day/Night Mode Switching] can only be set in [Timer 1].
[External Device Output] and [Day/Night Mode Switching] do
not support [Repeat Interval].
When [Day/Night] in the Admin Viewer is set to [Auto], Day/
Night Mode switching will not happen when a timer event is
triggered (p. 137).
If the [Day/Night Mode Switching] settings switch Day/Night
Mode while the Admin Viewer/VB Viewer is assigned camera
control, control will be released.
Timer [Start Time] [End Time] [Repeat Interval]
[Timer 1] 0:00 12:00 10 sec
[Timer 2] 12:00 0:00 10 sec