Filter
Top Products
67
Setting Page
4
802.1X Authentication
(1) [802.1X Authentication]
Set 802.1X authentication to [Disable] or [Enable].
Initially, if [802.1X Authentication] in [802.1X] is set to
[Enable] and [Apply] clicked, [Before changing the
setting, set 802.1X authentication to “Disable”. ] will
be displayed, and input for setting changes,
certificate installation/deletion, etc. will be unavailable.
To change settings, first set [802.1X Authentication] to
[Disable] and click [Apply]. Settings input will be
activated. Make any appropriate settings, set [802.1X
Authentication] to [Enable] and click [Apply].
(2) [Authentication Status]
Display the status of 802.1X authentication. There are
three types of status: [Authenticated],
[Unauthenticated], and [Stop].
Authentication Method
(1) [Authentication Method]
Select from [EAP-MD5], [EAP-TLS], [EAP-TTLS], and
[EAP-PEAP] for the 802.1X authentication method.
(2) [User Name]
Enter the user name used for authentication.
(3) [Password]
Enter the required password for authentication.
This is displayed only when [Authentication Method] is
set to [EAP-MD5], [EAP-TTLS], or [EAP-PEAP].
Certificate Information
This is displayed only when [Authentication Method] is set
to [EAP-TLS], [EAP-TTLS], or [EAP-PEAP].
(1) [CA Certificate Status]
If no CA certificate is installed, [Not Installed] is
displayed. If a CA certificate is installed, the validity
period of the certificated is displayed.
(2) [Client Certificate Status]
If no client certificate is installed, [Not Installed] is
displayed. If a client certificate is installed, the validity
period of the certificated is displayed. This is
displayed only when [Authentication Method] is set to
[EAP-TLS].
(3) [Client Private Key Status]
If no client private key is installed, [Not Installed] is
displayed. If a client private key is installed, [Installed]
is displayed. This is displayed only when
[Authentication Method] is set to [EAP-TLS].
Certificate Management
This is displayed only when [Authentication Method] is set
to [EAP-TLS], [EAP-TTLS], or [EAP-PEAP].
(1) [Install CA Certificate]
Installs a CA certificate. Select the certificate file to be
installed using [Browse] and click [Exec].
(2) [Install Client Certificate]
Installs a client certificate. Select the certificate file to
be installed using [Browse] and click [Exec]. This is
displayed only when [Authentication Method] is set to
[EAP-TLS].
(3) [Install Client Private Key]
Installs a client private key. Select the private key file
to be installed using [Browse] and click [Exec]. This is
displayed only when [Authentication Method] is set to
[EAP-TLS].
(4) [Client Private Key Password]
Enter the password for the client private key. Required
when a password has been configured for the private
key. This is displayed only when [Authentication
Method] is set to [EAP-TLS].
[802.1X] Network Port Authentication Settings
The following can be set here.
• 802.1X Authentication
Display the 802.1X authentication enable/disable
control and status.
• Authentication Method
Set the authentication method used for 802.1X
authentication.
• Certificate Information
Display the certificate used for 802.1X
authentication and the private key installation
status.
• Certificate Management
Manage the certificates and private keys used for
802.1X authentication.