Filter
Top Products
PLAYING AN AUDIO FILE (EX-M20U Only)
158
● To skip to the beginning of the next track
Press the [ ] button (remote controller beeps).
To keep skipping forward, press the [ ] button multiple
times (remote controller beeps). The current track
number is shown on the LCD.
● To stop playback
Press the [ ] button (remote controller beeps).
• Pressing the [ ] button again will restart playback
from the beginning of the track where it was stopped.
● To adjust volume
Press the [+] or [–] volume buttons to adjust volume to
the desired level. The LCD shows the current volume
level.
● To turn off power
Press the camera’s power button.
• Camera power also turns off automatically if you do not
perform an operation for about 10 seconds after
playback is stopped.
IMPORTANT!
• The button operation tone does not sound if the
camera’s button tone function is turned off (page
107).
• You cannot use fast forward, fast reverse, or skip
while the current volume level is shown on the LCD.
Basic Remote Controller Operations
● To start playback
Press the [ ] button. The remote controller beeps to
indicate that playback has started.
• Pressing the [ ] button while the camera is off turns
on power and starts playback.
● To pause playback
Press the [ ] button (remote controller beeps).
Pressing the [ ] button or the [ ] button resumes
playback (remote controller beeps).
• If the Auto Power Off trigger time (about two minutes or
five minutes) is reached while playback is paused, the
camera will automatically turn off.
● To fast forward the playback
Hold down the [ ] button for a few seconds until fast
forward starts.
● To fast reverse the playback
Hold down the [ ] button for a few seconds until fast
reverse starts.
● To skip to the beginning of the current track
Press the [ ] button (remote controller beeps).
To skip to the beginning of a previous track, press the
[ ] button multiple times (remote controller beeps).
The current track number is shown on the LCD.