Filter
Top Products
73
OTHER RECORDING FUNCTIONS
NOTE
• The initial default setting is “REC Mode”.
When you want to assign this function to
[̇] and [̈] keys:
Recording mode
•[̇] and [̈] cycle through recording
modes.
• EX-S20U: Snapshot, BESTSHOT
• EX-M20U: Snapshot, BESTSHOT,
Snapshot Audio, Voice Recording
(page 168)
Flash mode
•[̇] and [̈] cycle through the flash
mode settings (page 47).
EV shift
•[̇] decreases compensation, [̈]
increases compensation (page 55).
White balance setting
•[̇] and [̈] cycle through white
balance settings (page 56).
ISO sensitivity
•[̇] and [̈] cycle through ISO
sensitivity settings (page 70).
No function assigned
Select this:
REC Mode
Flash
EV Shift
White Balance
ISO
Off
Assigning Functions to the [̆] and [̄]
Keys
A “key customization” feature lets you configure the [̆]
and [̄] keys so they change camera settings whenever
they are pressed in the REC mode. After you configure the
[̆] and [̄] keys, you can change the setting assigned to
them without going through the menu screen.
1.
In the REC mode, press [MENU].
2.
Select the “REC” tab, select “U/D Key”, and
then press [̈].
3.
Use [̆] and [̄] to select the setting you
want, and then press [SET].