Filter
Top Products
92
PLAYBACK
Playing Back a Voice Recording File
(EX-M20U Only)
Perform the following steps to play back a voice recording
file.
1.
In the PLAY mode, use [̇] and [̈] to display
the voice file (a file with on it) you want to
play.
2.
Press [SET].
• This starts playback of
the voice recording file
through the camera’s
speaker.
• You can perform the
following operations
while audio is playing.
To do this:
Fast forward or fast reverse
the audio
Pause and unpause audio
playback
Adjust audio volume
Cancel playback
Do this:
Hold down [̇] or [̈].
Press [SET].
Press [̆] or [̄].
Press [MENU].
IMPORTANT!
• Audio volume can be adjusted only when playback is
being performed or is paused.
• If your recording has index marks (page 67) inside it,
you can jump to the index mark before or after the
current playback location by pausing playback and
then pressing [̇] or [̈]. Next, press [SET] to
resume playback from the index mark position.
• When you have the LCD remote controller connected
to the camera, audio is output through the stereo
headphones (page 155) instead of the camera’s
speaker. Output through the headphones is
monaural.
• The volume of audio recorded with the camera
cannot be adjusted using the LCD remote controller.
Use the camera’s controller to adjust volume level in
this case.