Filter
Top Products
RECORDING
E-43
RECORDING
Turning On Camera Power
1.
Slide open the lens cover to turn on power and
enter the Record Mode.
• Sliding open the lens cover part way initially causes
the flash to pop up.
Sliding it the rest of the way open turns on camera
power and allows the lens to extend from the camera
body. Be sure to slide the lens cover open as far as it
will go.
• To change to the Playback Mode, press PLAY ON/
OFF.
Turning Off Camera Power
1.
Taking care you do not press it against the
lens, gently slide the lens cover in the direction
that shuts it.
• This starts a shutdown operation during which the fol-
lowing procedures are performed.
a. The monitor screen turns off and the operation lamp
starts to flash.
b. The lens retracts into the camera body.
c. After the lens completely retracts, the lens cover
slides the rest of the way closed.
d. After the lens cover closes, the flash unit retracts
into camera body.
e. The operation lamp stops flashing when the shut-
down operation is complete.
IMPORTANT!
Never open the battery compartment cover, unplug the
AC adaptor, or open the memory card slot cover while
the operation lamp is flashing.