Filter
Top Products
RECORDING
E-45
Basic Recording Operation
The following describes the basic operation for recording
images.
1.
Slide open the lens cover.
2.
After composing the image on the monitor
screen, press the shutter button about half
way and hold it there.
• If you plan to use the viewfinder to compose the im-
age, press DISP several times until the monitor screen
turns off.
• Take care to avoid blocking the lens, distance sensor
or light sensor with your fingers.
• Carefully press the shutter button, taking care not to
move the camera as you do.
3.
After confirming that the Auto Focus operation
is complete (the operation lamp lights green),
press the shutter button all the way down to
record the image.
• Pressing the shutter button releases the shutter, even
if Auto Focus was unsuccessful and the image is out
of focus.
• After you record an image, the camera takes a few
seconds to store it in memory. If you try to change to
the Playback Mode while a save operation is in
progress, the message “Press DISP to cancel save”
appears on the monitor screen. Pressing DISP at this
time cancels the save operation.
• Use of a tripod is recommended for slow shutter
speeds and telephoto shots to avoid blurring of the
image due to camera movement.
• The camera’s Auto Focus feature automatically fo-
cuses the image.
• The operation lamp lights green and the Auto Focus
Frame in the monitor screen turns green when the
Auto Focus operation is complete.