Cisco Systems CIVS-IPC-2500 Security Camera User Manual


 
1-4
Cisco Video Surveillance System IP Camera User Guide
OL-14220-01
Chapter 1 Overview
IP Camera Physical Details
Figure 1-2 and the table that follows describe the items on the rear of the IP camera.
Figure 1-2 Rear of IP Camera
1 Reset button Recessed button that reboots the IP camera or resets it to a default
state. You can use a pin or paper clip to depress it. It can be used
any time that the IP camera is on and can have various effects, as
described in the “Resetting the IP Camera” section on page 2-8.
2 Network LED (amber) Indicates information about the network connections as follows:
On—LAN connection is detected
Off—LAN connection is not detected
Blinking—Data is being transmitted or received via the LAN
connection
3 LAN port Accepts a standard LAN cable to connect the IP camera to a
10/100BASET hub, router, or switch.
4 PoE LED (green) Indicates information about PoE as follows:
On—PoE connection is detected
Off—PoE connection is not detected
5 Analog video output BNC connector for video output (75 ohm).
6 Speaker output Allows the connection of an optional external speaker through a
standard 3.5 mm mini phone jack.