Filter
Top Products
3-16
Cisco Video Surveillance System IP Camera User Guide
OL-14220-01
Chapter 3 Configuring and Managing the IP Camera
Audio/Video Windows
Preset Choose one the following preset white balance modes from the Preset
drop-down list:
• Normal—Suitable for most conditions that do not have special lighting
• Indoor—Suitable for indoor conditions when the Normal setting does
not provide a clear image
• Fluorescent—Suitable for indoor conditions with fluorescent lighting
• Outdoor—Suitable for outdoor conditions
The default setting is Normal.
Brightness Select a positive value to increase the brightness of the video from the IP
camera or select a negative value to decrease the brightness. For example, if
the IP camera is facing a bright light and the video appears too dark, you can
increase the brightness.
The default value is Normal, which is suitable for most conditions.
Sharpness Select a positive value to increase the sharpness of the video from the IP
camera or select a negative value to decrease the sharpness.
The default value is Normal, which is suitable for most conditions.
Contrast Select a positive value to increase the contrast of the video from the IP
camera or select a negative value to decrease the contrast.
The default value is Normal, which is suitable for most conditions.
Saturation Select a positive value to increase the saturation of the video from the IP
camera or select a negative value to decrease the saturation.
High saturation provides a vivid, intense color for a video image. With less
saturation, the video image appears more muted and gray.
The default value is Normal, which is suitable for most conditions.
Frame Repeat Count Designates how video output from the IP camera displays. The IP camera
generates two independent fields (odd and even) for each video capture,
which occur 60 times per second for NTSC or 50 times per second for PAL.
When Frame Repeat Count is set to 1, the IP camera combines one odd and
one even field to compose a video frame. When Frame Repeat Count is set
to 2, the IP camera uses one of the fields two times to compose a video frame.
A setting of 1 provides smoother video. It is designed for software that can
display interlaced video.
The default value is 2.
Options
Enable Time Stamp Check this check box to display the time from the internal clock of the IP
camera as an overlay on the video image from the IP camera.
Enable Text Display Check this check box to display designated text as an overlay on the video
image from the IP camera, and enter alphanumeric text of up to 20
characters.
This option can be useful for identifying this IP camera in an installation
with several IP cameras.
Table 3-8 Video Window Options (continued)
Option Description