Filter
Top Products
3-19
Cisco Video Surveillance System IP Camera User Guide
OL-14220-01
Chapter 3 Configuring and Managing the IP Camera
Security Windows
Product Process Window
The Product Process window displays the processes that occupy TCP or UDP ports, and lets you stop
any of these processes.
Take care when stopping processes because some processes are required for the camera to operate
properly.
Processes that you stop in this window can restart the next time that you log in to the IP camera. If you
delete a required process and the camera stops functioning, exit your web browser and then log back in
to the IP camera to restart the process.
To stop any process, click the Delete button that appears to the right of the process.
To make sure that the Product Process window shows the most current information, click the Refresh
button.
Table 3-10 describes the options in the Product Process window. All options are for display only.
Initialization Window
The Initialization window lets you configure administrator and root passwords, whether the IP camera
can be accessed through an HTTP connection in addition to the default HTTPS (HTTP secure)
connection, and whether the IP camera can be accessed through a SSH connection.
Table 3-11 describes the options in the Initialization window.
Table 3-10 Product Process Window Options
Option Description
Protocol Port (tcp or udp) that the process occupies
Local Address IP address of the device that the process is listening to
Foreign Address IP address and port number of the client device that is connected for the
process
State State of the process
Program Name Name of the process
Table 3-11 Initialization Window Options
Option Description
Admin Password Allows you to change the password for the IP camera administrator.
The password is case sensitive and must contain at least 8 characters, which
can be letters, numbers, and special characters, but no spaces. Special
characters are: ! " # $ % & ' ( ) * + , - . : ; < = > ? @ [ \ ] ^ _ ` { | } ~.
Note You can also change this password in the Users window as described
in the “Users Window” section on page 3-10.
Root Password Allows you to change the root password, which is used when accessing the
IP camera through a SSH connection.
The password is case sensitive and must contain at least 8 characters, which
can be letters, numbers, and special characters, but no spaces. Special
characters are: ! " # $ % & ' ( ) * + , - . : ; < = > ? @ [ \ ] ^ _ ` { | } ~.