Filter
Top Products
41
SOFTWARE INSTALLATION GUIDE
INSTALLING ARCSOFT PHOTOIMPRESSION – ALL WINDOWS USERS
Step 1 Make sure your camera is powered off and not connected to the computer.
Step 2 Make sure the computer is powered on and Windows is running.
Step 3 Close any other applications or software you may be running.
Step 4 Insert the CD-ROM included in your camera’s packaging into your computer’s CD-ROM Drive.
NOTE: If the installer does not start automatically within 30 seconds after the CD-ROM has
been inserted, click on "My Computer" either on the Desktop or in the Start Menu and locate
the CD-ROM Drive. Double click on the CD-ROM Drive icon for installation. Double-click on
the file named Install and proceed to Step 5.
Step 5 Select the language. Click [OK]
Step 6 The installation screen will appear, Click on
Install ArcSoft PhotoImpression 2000
Step 7 The Set- Up language window will appear, select the language
from the drop down box and click OK.
Step 8 Click [Next >]
Step 9 Click [Yes]
4060 U Guide-E/F/G 7/8/03 12:56 PM Page 41