Filter
Top Products
10
GETTING STARTED
TURNING THE CAMERA ON AND OFF
The On/Off Switch is located in the front of the camera.
1. Slide the On/Off Switch down to power the camera on. (fig.1.1)
• The lens cover will open.
• The LCD will turn on automatically
2. To turn the camera off, slide the On/Off Switch upwards. (fig.1.2)
Note: The camera will automatically power off after 30 seconds of
inactivity even the ON/OFF switch is in the "ON" position. Press the
shutter button to power the camera back on.
REMOVING THE PROTECTIVE PLASTIC FILM
To prevent the viewfinder and LCD from damaging during
transportation, both the view finder and LCD is covered with a clear plastic
film. To get a more clear view of subject while taking pictures, please
remove the protective film.
SETTING THE LANGUAGE, DATE AND TIME
When the camera is powered on for the first time, the Language, Date and Time menus will
appear.
Setting the Language
1. Turn the camera on.
• The Language Setup screen will appear on the LCD.
2. Press the joystick , to highlight the language you would like to use.
3. Press to select by pressing the joystick in.
4. The next screen will read “Are You Sure?” press the joystick to select No or Yes.
5. Press to select.
• If you select No, you will return to the Language select screen.
• If you select Yes, all menu screens will be displayed in the new language.
Each language will set the default setting for date format and TV option. To change these
settings, please refer to the Customizing the Camera Settings section on p.33.
Language(s) Date Format Setting TV Option
English / Español MM/DD/YYYY NTSC
Français / Deutsch / Italiano DD/MM/YYYY PAL
YYYY/MM/DD PAL
YYYY/MM/DD NTSC
LANGUAGE OPTION
OK
English
Français
Deutsch
Italiano
RETURN SET
Español
Nederlands
RETURN SET
LANGUAGE OPTION
OK
Are You Sure?
No
Yes
RETURN SET
OK
O
K
O
K
fig.1.1 Camera On
fig.1.2 Camera Off