Filter
Top Products
13
TAKING PICTURES
TAKING A PICTURE WITH THE VIEWFINDER
Taking a picture with the viewfinder:
1. Turn the camera on.
2. Set the camera to ( ) Camera Mode.
• The LCD can be switched off to conserve battery power by
pressing the ( ) button.
3. Frame the subject in the viewfinder.
• If the subject appears blurry, adjust the viewfinder focus by turning
the diopter wheel.
4. Press the shutter button half-way to activate the auto-focus until the
green AF LED stops blinking. (For information on Focus Lock, please
go to p.14) (fig.1.1)
5. Press the shutter button fully to capture the image. (fig.1.2)
• The camera will beep when the image is captured if sound is
activated.
• The camera will make a click sound.
FLASH READY LED
Flash Ready LED Status Description
Steady (fig.1.1) The camera is capturing a video clip.
Blinking (fig.1.2) The flash is recharging. You may move the camera in this mode.
Note: Do not power the camera off or switch modes while the camera is capturing or storing
a picture or video clip to prevent corrupting the picture or video clip being stored.
O
K
O
K
fig.1.1
Diopter Adjusting
fig.1.2
fig.1.1
fig.1.2