Filter
Top Products
108
Technical Notes
Display Problem Solution
MONITOR OFF
Monitor has been left on for
extended period, activating
internal circuit protection.
Use viewfi nder or turn camera
off and wait a few minutes be-
fore turning camera on again.
—
NEW CITY IS IN THE
CURRENT TIME ZONE
Travel destination is in
same time zone as home
location.
No need to specify new time
zone if travel destination is
in same time zone as home
location.
94
WARNING !
THE MODE DIAL IS NOT
IN THE PROPER POSITION
Mode dial is positioned be-
tween two modes.
Adjust mode dial to select de-
sired mode.
6
NO MENU AVAILABLE
button pressed while
camera in mode.
Choose another mode before
pressing button.
39
FILE CONTAINS
NO IMAGE DATA
File created by computer or
different make of camera.
View fi le on computer or cor-
rect make of camera.
57
THIS FILE CANNOT
BE PLAYED BACK
COMMUNICATIONS
ERROR
• Nikon Transfer is not run-
ning.
• USB cable disconnected
or memory card removed
while pictures are being
transferred to computer.
•
USB option set incorrectly.
• Start Nikon Transfer before
pressing button.
• If error appears in computer
monitor, click OK to exit
Nikon View. Turn camera
off, reconnect cable or re-
place memory card, then
turn camera on and transfer
pictures.
• Turn camera off and discon-
nect cable, then choose new
USB setting in camera setup
menu and reconnect cam-
era. If error persists, use
Nikon View button to
transfer pictures.
—
87,
57–60
—
NO IMAGES ARE
MARKED FOR
TRANSFER
No pictures selected for
transfer when
button
pressed to transfer pic-
tures to computer.
Disconnect camera and select
at least one picture for trans-
fer, then begin transfer again.
60, 87
TRANSFER ERROR
Error occurred when pic-
tures were transferred to
computer.
Restart transfer after check-
ing that camera is connected
and that batteries are fully
charged.
8–9,
59
TRANSFER CANCELLED
Transfer cancelled.