Filter
Top Products
56
More on Playback
Viewing Pictures on TV
The EG-CP14 audio / video (A / V) cable included with the camera can be used
to connect the camera to a television or video-cassette recorder (VCR).
Choosing a Video Mode
The Video mode item in the setup menu offers a choice of NTSC and PAL
(
99). Be sure that the mode selected matches the standard used in the
video device.
1
Turn the camera off
Turn the camera off before connecting or disconnecting the A / V cable.
2
Connect the A / V cable
Open the interface connector cov-
er as shown at right and insert the
black plug into the camera’s inter-
face connector. Insert the yellow
plug into the video-in jack on the
television or VCR. Connect the
white plug to the audio-in jack.
PAL
If the camera is used to record movies with PAL selected for Video mode and the
camera connected to a video device, video output will be suspended and the camera
monitor will turn on.
3
Tune the television to the video channel
If in doubt, consult the documentation for your television or VCR.
4
Turn the camera on
Press the button for about a second to turn the camera on. The camera
monitor will remain off and the television will show the image normally
shown in the monitor.