Filter
Top Products
• Wake up the unit during PIR detection.
By pressing the [UP] or [DOWN] button 2 seconds to
wake up the unit inter preview.
3. Settings on Preview.
Set the functions during TFT in preview status.
3.1 Set the Capturing mode:
• Power on the unit, press the [MENU] button to call
out the menu.
• Press [UP] or [DN] to move the highlight to
CAPTURE MODES.
• Then press the [CONFIRM] button to into the capture
setting.
• Press the [UP] or [DN] button to select the capturing
and press the [CONFIRM] to confirm.
• Press [MENU] again to exit the capturing mode
settings.