Filter
Top Products
minute to leave the coverage area. Then the
camera will enter PIR detection mode.
b. After 5 minutes in test mode, the camera will
then enter count down mode for 1 minutes and
the front green indicator will start blinking giving
you one minute to leave the coverage area. The
camera will enter PIR detection mode.
4. Using the camera in PIR detection mode.
• Mount the camera to tree or other sturdy object using
either two supplied tree screw or mounting strap
(Please refer to the mounting suggestions section in
this manual)
• Open the front housing and move the switch to the
ON position. At this point you have 30 seconds to
make any program adjustments.