Filter
Top Products
23
Building a Security Application
The Administrator can
combine options on the
application page to perform
many useful security
applications. There are two
trigger sources coming from
attached devices, such as for
motion detection. There are
also two kinds of actions
responding to such events,
including uploading
snapshots over the Internet
and driving other attached
devices. To upload the
snapshots, the User can
choose either email or FTP
according to user’s needs. Both e-mail and FTP use the network settings on the
network page. Refer to the definition section for detail configuration.
1. Click on “Configuration” on
homepage,
2. Click on “Application” in the left
column,
3. Check the weekdays as you
need and give the period of
"Snapshots begin" time and
"Snapshots end" time to monitor
the triggering conditions every
day,
4. Check the “Event operation”. The triggering condition can be set to detected motion
or status of the attached device,
5. Set the delay before detecting next event to avoid continuous false alarms following
the original event,