D-Link DCS-5222L Digital Camera User Manual


 
47D-Link DCS-5222L User Manual
Section 4: Conguration
Event Setup
In a typical application, when motion is detected, the DCS-5222L sends images to a FTP server or via e-mail as notications. As shown in the
illustration below, an event can be triggered by many sources, such as motion detection or external digital input devices. When an event is
triggered, a specied action will be performed. You can congure the network camera to send snapshots or videos to your e-mail address or FTP
site.
To start plotting an event, it is suggested to congure server and media columns rst so that the network camera will know what action shall be
performed when a trigger is activated.