D-Link DCS-5222L Digital Camera User Manual


  Open as PDF
of 85
 
58D-Link DCS-5222L User Manual
Section 4 - Conguration
ICR and IR
Here you can congure the ICR and IR settings. An IR(Infrared) Cut-Removable(ICR) lter can be disengaged for increased sensitivity in low light
environments.
Automatic:
Day Mode:
Night Mode:
Schedule Mode:
IR Light Control:
O:
On:
Sync:
Schedule:
The Day/Night mode is set automatically.
Generally, the camera uses Day mode and
switches to Night mode when needed.
Day mode enables the IR Cut Filter.
Night mode disables the IR Cut Filter.
Set up the Day/Night mode using a schedule.
The camera will enter Day mode at the starting
time and return to Night mode at the ending
time.
Select from the options to enable or disable the
IR (infrared) light according to your preferences.
This setting provides additional controls depend-
ing on your specic application.
The IR light will always be o.
The IR light will always be on.
The IR light will turn on when the ICR sensor is
on.
The IR light will turn on or o according to the
schedule that you specify below.
 previous next