Filter
Top Products
25D-Link DCS-931L User Manual 25
Section 3 - Conguration
Wireless Setup
Check this box to allow your camera to connect to your network wirelessly.
Enter the network name(SSID) of the wireless network you want to connect
to. You can also click the Site Survey button below to choose an available
network and ll in settings automatically.
If you are using Ad-Hoc as your connection mode, select the same channel
that is being used by yourwireless network.
Select the connection mode used by your wireless network. In most cases,
you should select Infrastructure. Ad-Hoc is only used if your camera is
directly connecting to another PC or device.
Clicking this button will allow you to select an available wireless network
to connect to, and will ll in the necessary settings for you.
Select the wireless security mode used by your wireless network. If you
select WEP or WPA-PSK/WPA2-PSK, enter the password for your wireless
network in the text box that appears.
Enable
Wireless:
SSID:
Channel:
Connection
Mode:
Site Survey:
Wireless
Security Mode:
This section allows you to set up and congure the wireless settings on your camera.