Filter
Top Products
26D-Link DCS-931L User Manual 26
Section 3 - Conguration
Extender Setup
Check this box to enable Extender Mode.
This shows the name of the Host wireless network that the camera is
connected to and will extend.
Select an option:
• Same as Host Wireless Network Name: Your extended network
will use the same name and settings as your Host network. Your
devices can use the same wireless information to connect to both
the Host and Extended networks.
• Create a New Wireless Network Name: This allows you to
manually set the name and security used for the extended network.
You will need to add this information for each wireless device that
connects to this Extended network.
Set the maximum number of clients that are allowed to connect to the
extended network.
If you choose to Create a New Wireless Network Name, you can set
your wireless security options here.
Enable
Extender
Mode:
Host Wireless
Network Name:
Extended
Wireless
Network Name
(SSID):
Maximum
Clients Allowed
to Connect:
Security Mode:
This section allows you to setup and congure the wireless network extending feature of your camera. Extender Mode allows your camera to extend
the range of your existing wireless network. You can choose to use the same network name and settings as your existing wireless network, or you
can create a new one.