D-Link DCS-933L Security Camera User Manual


  Open as PDF
of 57
 
15D-Link DCS-933L User Manual
Section 2 - Installation
Manual Hardware Installation
If you wish to set up your camera without using the Camera Setup Wizard, please follow these steps.
Note: In order to use the mydlink features of this product, you will need to go through the Camera Setup Wizard or Zero
Conguration Setup.
Optional: Use WPS to Connect Wirelessly
You can use WPS to connect your camera to your network wirelessly. For more
information, refer to “WPS - Push Button Setup” on page 17. If your router
doesnotsupportWPS,youwillstillbeabletosetupyourcamera’swireless
settingsinthecamera’swebinterface.
Connect the Ethernet Cable
UsetheincludedEthernetcableandplugitintothecamera.Plugtheother
end into an available port on your router.
Attach the External Power Adapter
Connect the power adapter to the power connector on your camera, then
plug the power adapter into a wall outlet.
Congure Your Camera
Refer to “Conguration” on page 19 for information on how to congure
your camera.
 previous next