D-Link DCS-933L Security Camera User Manual


  Open as PDF
of 57
 
35D-Link DCS-933L User Manual 35
Section 3 - Conguration
FTP
Host Name:
Port:
User Name:
Password:
Path:
Passive Mode:
Enter the IP address of the FTP server that you will be connecting to.
EntertheportoftheFTPserverthatyouwillbeconnectingto.Thedefault
is 21.
EntertheusernameofyourFTPserveraccount.
EnterthepasswordofyourFTPserveraccount.
Enterthedestinationpath/foldertosavelestoontheFTPserver.
EnablingpassivemodemayhelpyoureachyourFTPserverifyourcamera
is behind a router protected by a rewall.
This section allows you to congure your camera to send snapshots and video clips to an FTP server.
Enable the
uploading of
images to an
FTP server:
Image
Frequency:
Base File Name:
Enablingthiswillallowsnapshotstobeuploadedindierentways:
• Choosing Always will upload snapshots continuously based on
the Image Frequency specified.
• Choosing Schedule will allow you to schedule when to start and
stop the uploading of snapshots.
• Select Motion/Sound Detection if you would like the camera to
upload images only when motion or sound is detected.
Select the frequency you would like for your images to be taken and
uploaded. You can choose to upload by frames per second, or by seconds
per frame.
Choose a base le name for your snapshots.
 previous next