D-Link DCS-933L Security Camera User Manual


  Open as PDF
of 57
 
17D-Link DCS-933L User Manual
Section 2 - Installation
To create a WPS connection:
Step 1
Make sure the camera is powered on, then press and hold the WPS button for
threeseconds.TheblueWPSstatusLEDwillstartblinking.
Step 2
Press the WPS button on your router within 60 seconds. The WPS button is
usually located on the front or side of your router. On some routers, you may
need to log in to the web interface and click on an on-screen button to activate
the WPS feature. If you are not sure where the WPS button is on your router,
pleaserefertoyourrouter’sUserManual.
The DCS-933L will automatically create a secure wireless connection to your
router.Whileconnecting,thegreenLEDwillashandyourcamerawillreboot.
WPS - Push Button Setup
WPS Button
Alternatively, you may create a secure wireless connection using the WPS Button on the back of the camera.
 previous next